Negotiable
The date of payment from buyers deliver within days
Shandong
Long-term effective
2022-06-22 02:36
297
Company Profile
By certification [File Integrity]
Contact：yantao(Mr.)
Email：
Telephone：
Phone：
Area：Shandong
Address：Shandong
Website：http://www.asntegeosynthetics.com/ http://yantao.china-haosheng.com/
PP Uniaxial Geogrid
PP Uniaxial Geogrid is manufactured from Polypropylene. It is produced through the process of extruding, punching, heating and stretching.
Performance
•High tensile strength
•High elastic modulus
Benefits
•Improving bearing capacity of foundation, retaining wall and dam
•Extending project life
•Reducing floor area
•Shortening construction period, reducing cost and maintaining expense
Application
• Retaining Wall Reinforcement • Railway Reinforcement
• Dam Reinforcement • Sea Reclamation Project
The construction method
○ When used for roadbed and road surface, the construction method is the same as two-way geogrids.
○ When used for reinforced soil retaining wall, the construction method is as follows:
1, Set the foundation, according to the design of the wall system for construction, selected with precast reinforced concrete panel, general thickness of 12-15 CMS support on the basis of precast concrete. Its width is not more than 30㎝, thickness is not less than 20㎝, and buried depth is not less than 60㎝ to prevent frost heaving of foundation.
2, Smooth the wall base, according to the design requirements of excavation, smooth. Soft soil should be compacted or filled, compacted to the required density, should be slightly beyond the wall.
3, The reinforcement laying, the main strength direction of the reinforcement should be perpendicular to the wall, fixed with pins.
4, Wall filling, mechanical filling, the distance between the wheels and reinforcement should be maintained at least 15 CMS. After compaction, a layer of soil is about 20-15 cm thick.
5, Wall construction, wall should be wrapped in geotextile, to prevent soil leakage.
HDPE Uniaxial Geogrid
HDPE Uniaxial Geogrid is manufactured from High Density Polyethylene. It is produced through the process of extruding, punching, heating and stretching.
Performance
•High tensile strength
•Low creep deformation
Benefits
•Improving bearing capacity of retaining wall or dam
•Extending the project life
•Reducing floor area
•Shortening construction period, reducing cost and maintaining expense
Application
• Retaining Wall Reinforcement
• Steep Slope Reinforcement
• Dam Reinforcement
The construction method
○ When used for roadbed and road surface, the construction method is the same as two-way geogrids.
○ When used for reinforced soil retaining wall, the construction method is as follows:
1, Set the foundation, according to the design of the wall system for construction, selected with precast reinforced concrete panel, general thickness of 12-15 CMS support on the basis of precast concrete. Its width is not more than 30㎝, thickness is not less than 20㎝, and buried depth is not less than 60㎝ to prevent frost heaving of foundation.
2, Smooth the wall base, according to the design requirements of excavation, smooth. Soft soil should be compacted or filled, compacted to the required density, should be slightly beyond the wall.
3, The reinforcement laying, the main strength direction of the reinforcement should be perpendicular to the wall, fixed with pins.
4, Wall filling, mechanical filling, the distance between the wheels and reinforcement should be maintained at least 15 CMS. After compaction, a layer of soil is about 20-15 cm thick.
5, Wall construction, wall should be wrapped in geotextile, to prevent soil leakage.
http://www.asntegeosynthetics.com/
